1.制動時發出異常聲音
1. Abnormal sound when braking
踩剎車時，剎車系統會引起強烈的金屬摩擦。
When you step on the brake, the brake system will cause strong metal friction.
原因可能是剎車片上的異物或剎車盤生銹。
The cause may be foreign matter on the brake pads or rust on the brake discs.
2.制動踏板的行程變長
2. The stroke of brake pedal becomes longer
剎車變軟時，您會看到筆直的白點。
As the brakes soften, you'll see straight white spots.
較長的制動沖程主要是由于空氣進入制動系統，缺少制動油，可能的泄漏和制動襯塊的嚴重磨損。

The longer brake stroke is mainly due to air entering the brake system, lack of brake oil, possible leakage and serious wear of brake pads.
3.制動偏差
3. Braking deviation
制動器打滑不太常見，主要反映了在施加制動器時方向盤向一側彎曲的事實。
Brake slip is less common, mainly reflecting the fact that the steering wheel bends to one side when the brake is applied.
造成這種現象的原因可能是制動襯塊偏心磨損和制動分泵出現問題。
This phenomenon may be caused by eccentric wear of brake pad and problems of brake cylinder.
4.剎車越來越難
4. Braking is more and more difficult
許多卡都有增加制動的問題。加強制動器的主要原因是真空助力器故障。剎車不輔助，經常使用剎車。
Many cards have the problem of increasing braking. The main reason for strengthening the brake is the failure of the vacuum booster. The brake is not auxiliary, and the brake is often used.
5.剎車回彈
5. Brake rebound
許多卡伙伴都遇到過這種情況，但是在制動時，會出現一種現象，其中上肢從制動踏板上彈起，主要是由于制動盤表面不平整。墊片和鋼環變形
Many card partners have encountered this situation, but when braking, there will be a phenomenon, in which the upper limb bounces from the brake pedal, mainly due to the uneven surface of the brake disc. Deformation of gasket and steel ring

文章標題：全自動混凝土攪拌車容易出現哪些異常？
鏈接URL：http://www.rwnh.cn/hangye/sdjbc/n67356.html

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源： 創新互聯