自動鏟料攪拌車設備的溫度由于在使用和使用過程中長期不間斷運行而自然升高，但是如果溫度超過設備本身可以承受的溫度，則設備將受到損壞。因此，如果設備溫度過高，則需要進行相應的維護工作，因此讓我們一起看一下。

The temperature of the automatic shovel mixer increases naturally due to the long-term uninterrupted operation in the process of use and use. However, if the temperature exceeds the temperature that the equipment can bear, the equipment will be damaged. Therefore, if the equipment temperature is too high, corresponding maintenance work is required, so let's have a look.

1.防止發動機過熱：由于環境溫度較高，因此發動機容易過熱。加強對發動機冷卻系統的檢查和維護，包括檢查水箱，恒溫器，水泵，風扇等零件，并注入冷卻水以觀察是否及時增加。當水溫超過100°C時，請?jiān)跊鏊牡胤酵Ｏ聛砝鋮s，以怠速運轉發動機，然后打開引擎蓋進行散熱。

1. Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat. Strengthen the inspection and maintenance of engine cooling system, including inspection of water tank, thermostat, water pump, fan and other parts, and inject cooling water to observe whether it is added in time. When the water temperature exceeds 100 ° C, please stop in a cool place to cool down, run the engine at idle speed, and then open the engine cover for heat dissipation.

2.防止發動機爆炸：夏天很熱，有時可能會超過35°C，但是在這個季節中，零件過時的汽車發生自然爆炸的可能性更高。好了

2. Prevent engine explosion: it is very hot in summer, sometimes it may exceed 35 ° C, but in this season, cars with outdated parts are more likely to have natural explosion. okay

3.防止損壞汽車漆：當暴露在強烈的陽光下時，汽車漆會老化并起皺。普通的美容蠟具有防曬作用，但是所有汽車蠟均包含硅。因此，它會持續很長時間。紫外線腐蝕涂料，留下黑點。車蠟本身沒有硬度或紫外線保護作用，但一旦變熱便會消失，因此請盡可能將其停放在涼爽的地方。

3. Prevent damage to car paint: when exposed to strong sunlight, automotive paint will age and wrinkle. Common beauty waxes have sunscreen effects, but all car waxes contain silicon. As a result, it will last a long time. Ultraviolet light corrodes the paint, leaving black spots. The wax itself has no hardness or UV protection, but it will disappear once it gets hot, so please park it in a cool place as much as possible.

4.防止輪胎破裂：溫度高，容易破裂，如果溫度過高，輪胎會變形，拉伸強度容易降低。至于輪胎本身，如果在非標準氣壓，輪胎老化，性能下降或駕駛過程中行駛時，汽車在硬質金屬或其他硬物上滾動，汽車會突然爆裂。

4. Prevent tire from cracking: high temperature, easy to crack, if the temperature is too high, the tire will deform and the tensile strength is easy to reduce. As for the tire itself, if the car rolls on hard metal or other hard objects under non-standard pressure, tire aging, performance degradation or driving, the car will burst suddenly.

5.防止發動機潤滑失效：在高溫下，發動機油的粘度降低，抗氧化性降低，導致潤滑不良。因此，應經常檢查機油的數量和質量，并及時添加或更換。注意及時清潔機油濾清器和散熱器，確保機油沒有被堵塞并且熱量散發良好，并避免了發動機過載。

5. Prevent engine lubrication failure: under high temperature, the viscosity of engine oil decreases and the oxidation resistance decreases, resulting in poor lubrication. Therefore, the quantity and quality of engine oil should be checked frequently and added or replaced in time. Pay attention to clean the oil filter and radiator in time to ensure that the oil is not blocked and the heat is well distributed, and avoid engine overload.

6.防止制動器故障：在高溫環境下，制動液會蒸發并容易蒸發，從而在制動管路中產生空氣阻力。此外，制動蹄很容易磨損，導致制動故障。因此，應經常檢查和調整制動系統，并注意在長的斜坡上停車和干燥制動器，以確保良好的制動性能。如果制動輪轂很熱，請停止并冷卻，但不要倒入冷水以防止損壞制動輪轂。