MySQL+Amoeba+MySQLMMM高可用群集-創新互聯

一、MySQL-MMM(Master-Master MySQL)

MMM概述

雙主故障切換和日常管理的腳本程序
由多個mysql主服務器和多個mysql從服務器組成
雖然叫做雙主復制，但是業務上同一時刻只允許對一個主進行寫入，另一臺備選主上提供部分讀服務，
MMM使用Perl語言開發，主要用來監控和管理MySQL Master-Master（雙主）復制
其內部附加的工具腳本也可以實現多個slave的read負載均衡。

注：

成都創新互聯專注于企業營銷型網站、網站重做改版、向陽網站定制設計、自適應品牌網站建設、html5、商城網站定制開發、集團公司官網建設、成都外貿網站建設、高端網站制作、響應式網頁設計等建站業務，價格優惠性價比高，為向陽等各大城市提供網站開發制作服務。

同一時刻只允許一個主進行寫入，額外主提供部分讀的服務
不適用于要求數據一致性很高的場合(可替換產品為：Heartbeat+DRBD+MySQL高可用方案)

MMM組成

mmm_mond：監控進程，負責所有的監控、決定和處理所有節點
mmm_agentd：運行在每個MySQL數據庫的代理進程，完成監控本地狀態并于監控端通信
mmm_control：一個腳本，提供mmm_mond進程的命令

二、案例

實驗環境：
六臺Centos6,兩臺主mysql（master01、master02）,兩臺從mysql（slave01、slave02）,一臺監控（mmm_mond）,一臺讀寫調度器（amoeba）

先部署主主（master01與master02）復制

Master01

1.準備工作

vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.10
    NETMASK=255.255.255.0

vim /etc/sysconfig/network-scripts/ifcfg-eth2
    DEVICE=eth2
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=dhcp

vim /etc/hosts
    192.168.1.10    db1
    192.168.1.20    db2
    192.168.1.30    db3
    192.168.1.40    db4

vim /etc/sysconfig/network
    HOSTNAME=db1

reboot

2.YUM源配置并安裝MMM

rm -rf /etc/yum.repos.d/*

wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo

yum -y install epel-release

yum -y install mysql-mmm* mysql mysql-server mysql-devel

3.MySQL配置

/etc/init.d/mysqld start && chkconfig --level 35 mysqld on

mysqladmin -uroot password "123"

cp /usr/share/doc/mysql-server-5.1.73/my-medium.cnf /etc/my.cnf

vim /etc/my.cnf
    [mysqld]
    50 log-slave-updates

/etc/init.d/mysqld restart

4.授權并主主同步

mysql -u root -p
mysql> grant replication slave on *.* to 'slave'@'192.168.1.%' identified by '123';
mysql> show master status;
+------------------+----------+--------------+------------------+
| File             | Position | Binlog_Do_DB | Binlog_Ignore_DB |
+------------------+----------+--------------+------------------+
| mysql-bin.000001 |      647 |              |                  |
+------------------+----------+--------------+------------------+
1 row in set (0.00 sec)
mysql> change master to master_host='192.168.1.20',master_user='slave',master_password='123',master_log_file='mysql-bin.000001',master_log_pos=481;
//所跟IP、log、pos等信息都為第二臺主的信息
mysql> start slave;
mysql> show slave status\G;
//查看同步狀態，I/0和SQL線程狀態為yes則正確

Master02

1.準備工作

vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.20
    NETMASK=255.255.255.0

vim /etc/sysconfig/network-scripts/ifcfg-eth2
    DEVICE=eth2
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=dhcp

vim /etc/hosts
    192.168.1.10    db1
    192.168.1.20    db2
    192.168.1.30    db3
    192.168.1.40    db4

vim /etc/sysconfig/network
HOSTNAME=db2

reboot

2.YUM源配置并安裝MMM

rm -rf /etc/yum.repos.d/*

wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo

yum -y install epel-release

yum -y install mysql-mmm* mysql mysql-server mysql-devel

3.MySQL配置

/etc/init.d/mysqld start && chkconfig --level 35 mysqld on

mysqladmin -uroot password "123"

cp /usr/share/doc/mysql-server-5.1.73/my-medium.cnf /etc/my.cnf

vim /etc/my.cnf
    [mysqld]
    50 log-slave-updates
    58 server-id = 2

/etc/init.d/mysqld restart

4.授權并主主同步

mysql -u root -p
mysql> grant replication slave on *.* to 'slave'@'192.168.1.%' identified by '123';
mysql> show master status;
+------------------+----------+--------------+------------------+
| File             | Position | Binlog_Do_DB | Binlog_Ignore_DB |
+------------------+----------+--------------+------------------+
| mysql-bin.000001 |      481 |              |                  |
+------------------+----------+--------------+------------------+
1 row in set (0.00 sec)
mysql> change master to master_host='192.168.1.10',master_user='slave',master_password='123',master_log_file='mysql-bin.000001',master_log_pos=647;
//所跟IP、log、pos等信息都為第一臺主的信息
mysql> start slave;
mysql> show slave status\G;

再部署兩對主從復制（m1與s1，m2與s2）

Slave01

1.準備工作

vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.30
    NETMASK=255.255.255.0

vim /etc/sysconfig/network-scripts/ifcfg-eth2
    DEVICE=eth2
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=dhcp

vim /etc/hosts
    192.168.1.10    db1
    192.168.1.20    db2
    192.168.1.30    db3
    192.168.1.40    db4

vim /etc/sysconfig/network
    HOSTNAME=db3

reboot

2.YUM源配置并安裝MMM

rm -rf /etc/yum.repos.d/*

wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo

yum -y install epel-release

yum -y install mysql-mmm* mysql mysql-server mysql-devel

3.MySQL配置

/etc/init.d/mysqld start && chkconfig --level 35 mysqld on

mysqladmin -uroot password "123"

cp /usr/share/doc/mysql-server-5.1.73/my-medium.cnf /etc/my.cnf

vim /etc/my.cnf
    [mysqld]
    50 relay-log=relay-log-bin
    51 relay-log-index=slave-relay-bin.index
    59 server-id = 3

/etc/init.d/mysqld restart

4.授權并主從同步（m1,s1）

mysql -u root -p
mysql> change master to master_host='192.168.1.10',master_user='slave',master_password='123',master_log_file='mysql-bin.000001',master_log_pos=647;
//所跟IP、log、pos等信息都為第一臺主的信息
mysql> start slave;
mysql> show slave status\G;

Slave02

1.準備工作

vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.40
    NETMASK=255.255.255.0

vim /etc/sysconfig/network-scripts/ifcfg-eth2
    DEVICE=eth2
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=dhcp

vim /etc/hosts
    192.168.1.10    db1
    192.168.1.20    db2
    192.168.1.30    db3
    192.168.1.40    db4

2.YUM源配置并安裝MMM

rm -rf /etc/yum.repos.d/*

wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo

yum -y install epel-release

yum -y install mysql-mmm* mysql mysql-server mysql-devel

3.MySQL配置

/etc/init.d/mysqld start && chkconfig --level 35 mysqld on

mysqladmin -uroot password "123"

cp /usr/share/doc/mysql-server-5.1.73/my-medium.cnf /etc/my.cnf

vim /etc/my.cnf
    [mysqld]
    50 relay-log=relay-log-bin
    51 relay-log-index=slave-relay-bin.index
    59 server-id = 4

/etc/init.d/mysqld restart

4.授權并主從同步（m2,s2）

mysql -u root -p
mysql> change master to master_host='192.168.1.20',master_user='slave',master_password='123',master_log_file='mysql-bin.000001',master_log_pos=647;
//所跟IP、log、pos等信息都為第二臺主的信息
mysql> start slave;
mysql> show slave status\G;

配置高可用MySQL-MMM

Master01

1.新建授權用戶

mysql> grant super,replication client,process on *.* to 'mmm_agent'@'192.168.1.%' identified by '123';//主服務器授權，從服務器自動同步
mysql> grant replication client on *.* to 'mmm_monitor'@'192.168.1.%' identified by '123';           //主服務器授權，從服務器自動同步
mysql> grant all on *.* to 'test'@'192.168.1.%' identified by '123';                    //新建測試用戶

2.配置MMM_COMMON

vim /etc/mysql-mmm/mmm_common.conf
    active_master_role      writer
    <host default>
            cluster_interface       eth0                    //集群IP承載的接口
            pid_path                /var/run/mysql-mmm/mmm_agentd.pid       //PID文件位置(存放MMM的進程號)
            bin_path                /usr/libexec/mysql-mmm/         //運行命令位置
            replication_user        slave                   //需使用主從同步時授權用戶
            replication_password    123
            agent_user              mmm_agent                   //代理連接
            agent_password          123
    </host>
    <host db1>
            ip      192.168.1.10
            mode    master
            peer    db2                     //當db1主機不能使用，自動切換到db2
    </host>
    <host db2>
            ip      192.168.1.20
            mode    master                  //當前服務器作為主服務器(寫)
            peer    db1                     //當db2主機不能使用，自動切換到db1
    </host>
    <host db3>
            ip      192.168.1.30
            mode    slave
    </host>
    <host db4>
            ip      192.168.1.40
            mode    slave                   //當前主機作為從服務器(讀)
    </host>
    <role writer>
            hosts   db1, db2
            ips     192.168.1.250               //寫服務器VIP
            mode    exclusive                   //只有一個host可以writer
    </role>
    <role reader>
            hosts   db3, db4
            ips     192.168.1.251, 192.168.1.252        //讀服務器VIP
            mode    balanced                    //多個host可以reader
    </role>

3.配置MMM_AGENT

vim /etc/mysql-mmm/mmm_agent.conf
include mmm_common.conf
this db1

4.拷貝文件給其余主機

scp /etc/mysql-mmm/mmm_common.conf root@192.168.1.20:/etc/mysql-mmm/
scp /etc/mysql-mmm/mmm_common.conf root@192.168.1.30:/etc/mysql-mmm/
scp /etc/mysql-mmm/mmm_common.conf root@192.168.1.40:/etc/mysql-mmm/

/etc/init.d/mysql-mmm-agent restart && chkconfig --level 35 mysql-mmm-agent on

Master02

配置MMM_AGENT

vim /etc/mysql-mmm/mmm_agent.conf
this db2

/etc/init.d/mysql-mmm-agent restart && chkconfig --level 35 mysql-mmm-agent on

Slave01

配置MMM_AGENT

vim /etc/mysql-mmm/mmm_agent.conf
this db3

/etc/init.d/mysql-mmm-agent restart && chkconfig --level 35 mysql-mmm-agent on

Slave02

配置MMM_AGENT

vim /etc/mysql-mmm/mmm_agent.conf
this db4

/etc/init.d/mysql-mmm-agent restart && chkconfig --level 35 mysql-mmm-agent on

監控配置（mmm_mon）

1.準備工作

vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.50
    NETMASK=255.255.255.0

vim /etc/sysconfig/network-scripts/ifcfg-eth2
    DEVICE=eth2
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=dhcp

vim /etc/hosts
    192.168.1.10    db1
    192.168.1.20    db2
    192.168.1.30    db3
    192.168.1.40    db4

reboot

2.YUM源配置并安裝MMM

rm -rf /etc/yum.repos.d/*

wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo

yum -y install epel-release

yum -y install mysql-mmm* mysql

3.配置MMM_COMMON

scp 192.168.1.10:/etc/mysql-mmm/mmm_common.conf /etc/mysql-mmm/

4.配置MMM_MON

vim /etc/mysql-mmm/mmm_mon.conf
    include mmm_common.conf
    <monitor>
            ip                  127.0.0.1
            ping_ips            192.168.1.10,192.168.1.20,192.168.1.30,192.168.1.40
    </monitor>
    <host default>
            monitor_user        mmm_monitor
            monitor_password    123
    </host>
    debug 0

5.啟動服務并驗證

/etc/init.d/mysql-mmm-monitor restart && chkconfig --level 35 mysql-mmm-monitor on  //監控端啟動

mmm_control show                                    //查看節點狀態

mysql -u test -p -h 192.168.1.250

報錯解決方案：

[root@localhost ~]# mysql -u test -p -h 192.168.1.250
Enter password:
ERROR 2003 (HY000): Can't connect to MySQL server on '192.168.1.254' (113)

主服務器：

grant super,replication client,process on *.* to 'mmm_agent'@'db1' identified by '123';
grant super,replication client,process on *.* to 'mmm_agent'@'db2' identified by '123';
grant super,replication client,process on *.* to 'mmm_agent'@'db3' identified by '123';
grant super,replication client,process on *.* to 'mmm_agent'@'db4' identified by '123';

日志查看：

tail -f /var/log/mysql-mmm/mmm_agentd.log                       //MySQL端的Agent日志

tail -f /var/log/mysql-mmm/mmm_mond.log                     //監控機端的Monitor日志

部署讀寫調度器Amoeba

1.環境準備

vim /etc/sysconfig/network-scripts/ifcfg-eth0
    DEVICE=eth0
    TYPE=Ethernet
    ONBOOT=yes
    NM_CONTROLLED=no
    BOOTPROTO=static
    IPADDR=192.168.1.254
    NETMASK=255.255.255.0

2.安裝jdk與amoeba

yum -y erase java-*

chmod +x jdk-6u14-linux-x64.bin

./jdk-6u14-linux-x64.bin

mv jdk1.6.0_14/ /usr/local/jdk1.6

vim /etc/profile
export JAVA_HOME=/usr/local/jdk1.6
export CLASSPATH=$CLASSPATH:$JAVA_HOME/lib:$JAVA_HOME/jre/lib
export PATH=$JAVA_HOME/lib:$JAVA_HOME/jre/bin/:$PATH:$HOME/bin
export AMOEBA_HOME=/usr/local/amoeba
export PATH=$PATH:$AMOEBA_HOME/bin

source /etc/profile && java -version

mkdir /usr/local/amoeba

tar zxvf amoeba-mysql-binary-2.2.0.tar.gz -C /usr/local/amoeba/

chmod -R 755 /usr/local/amoeba/

3.在主Mysql數據庫新建授權用戶

mysql -u root -p
    mysql> grant all on *.* to haha@'192.168.1.%' identified by '123';

4.編輯amoeba配置文件

vim /usr/local/amoeba/conf/amoeba.xml
 30                <property name="user">hehe</property>            //設置連接Amoeba用戶
 31
 32                <property name="password">123</property>         //設置連接Amoeba用戶
115                 <property name="defaultPool">slaves</property>
116
117                 <property name="writePool">master</property>        注意刪除<!--  -->的注釋
118                 <property name="readPool">slaves</property>         //定義讀服務器池

vim /usr/local/amoeba/conf/dbServers.xml
 25                         <!-- mysql user -->
 26                         <property name="user">haha</property>               //設置連接Mysql的用戶
 27
 28                         <property name="password">123</property>                //設置連接mysql的密碼
注意刪除<!--  -->的注釋
 43         <dbServer name="master"  parent="abstractServer">
 44                 <factoryConfig>
 45                         <!-- mysql ip -->
 46                         <property name="ipAddress">192.168.1.254</property>         //定義寫服務器IP
 47                 </factoryConfig>
 48         </dbServer>
 49         <dbServer name="slave1"  parent="abstractServer">
 50                 <factoryConfig>
 51                         <!-- mysql ip -->
 52                         <property name="ipAddress">192.168.1.30</property>          //定義讀服務器IP
 53                 </factoryConfig>
 54         </dbServer>
 55         <dbServer name="slave2"  parent="abstractServer">
 56                 <factoryConfig>
 57                         <!-- mysql ip -->
 58                         <property name="ipAddress">192.168.1.40</property>          //定義讀服務器IP
 59                 </factoryConfig>
 60
 61         </dbServer>
 62         <dbServer name="slaves" virtual="true">
 68                         <property name="poolNames">slave1,slave2</property>     //定義輸入slaves讀服務器池的主機
 69                 </poolConfig>

amoeba start &

netstat -utpln | grep 8066

5.連接測試

client：mysql -u hehe -p -h 192.168.1.254 -P 8066

另外有需要云服務器可以了解下創新互聯cdcxhl.cn，海內外云服務器15元起步，三天無理由+7*72小時售后在線，公司持有idc許可證，提供“云服務器、裸金屬服務器、高防服務器、香港服務器、美國服務器、虛擬主機、免備案服務器”等云主機租用服務以及企業上云的綜合解決方案，具有“安全穩定、簡單易用、服務可用性高、性價比高”等特點與優勢，專為企業上云打造定制，能夠滿足用戶豐富、多元化的應用場景需求。

標題名稱：MySQL+Amoeba+MySQLMMM高可用群集-創新互聯
文章分享：http://www.rwnh.cn/article22/dosdjc.html

成都網站建設公司_創新互聯，為您提供網站制作、ChatGPT、外貿網站建設、網站建設、搜索引擎優化、服務器托管

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：631063699@qq.com。內容未經允許不得轉載，或轉載時需注明來源：創新互聯

猜你還喜歡下面的內容

内射老阿姨1区2区3区4区_久久精品人人做人人爽电影蜜月_久久国产精品亚洲77777_99精品又大又爽又粗少妇毛片

MySQL+Amoeba+MySQLMMM高可用群集-創新互聯

一、MySQL-MMM(Master-Master MySQL)

MMM概述

MMM組成

二、案例

先部署主主（master01與master02）復制

1.準備工作

2.YUM源配置并安裝MMM

3.MySQL配置

4.授權并主主同步

1.準備工作

2.YUM源配置并安裝MMM

3.MySQL配置

4.授權并主主同步

再部署兩對主從復制（m1與s1，m2與s2）

1.準備工作

2.YUM源配置并安裝MMM

3.MySQL配置

4.授權并主從同步（m1,s1）

1.準備工作

2.YUM源配置并安裝MMM

3.MySQL配置

4.授權并主從同步（m2,s2）

配置高可用MySQL-MMM

1.新建授權用戶

2.配置MMM_COMMON

3.配置MMM_AGENT

4.拷貝文件給其余主機

配置MMM_AGENT

配置MMM_AGENT

配置MMM_AGENT

監控配置（mmm_mon）

1.準備工作

2.YUM源配置并安裝MMM

3.配置MMM_COMMON

4.配置MMM_MON

5.啟動服務并驗證

部署讀寫調度器Amoeba

1.環境準備

2.安裝jdk與amoeba

3.在主Mysql數據庫新建授權用戶

4.編輯amoeba配置文件

5.連接測試

一、MySQL-MMM(Master-Master MySQL)

二、案例